海油工程-二级品类协议-3年-含砂分析仪品类协议
基本信息
项目名称
海油工程-二级品类协议-3年-含砂分析仪品类协议(二次)
工程项目名称
海油工程-二级品类协议-3年-含砂分析仪品类协议(二次)
项目概况
【★项目概况】本次含砂分析仪规格数量估算未来三年所需数量,未来三年考虑20个中心和40个井口平台,产品的规格尽可能覆盖常规项目需求。原年度供货协议即将到期,按计划推进新协议招标工作。此次招标签署单价协议。The specifications and quantities of sand monitors are estimated to be required in the next three years. In the next three years, 20 centers and 40 wellhead platforms will be considered, and the specifications of products will cover the requirements of conventional projects as far as possible.The original annual supply agreement is about to expire, and the bidding work of the new agreement will be promoted as planned.The tender signed a unit price agreement.【★主要技术规格】含砂分析仪品类购置。主要技术规格:分析仪的测量原理应为声学原理,分析仪测量方式应为非侵入式连续测量,分析仪砂粒检出限满足:油:25 μm,气:15μm;分析仪最小出砂率/分辨率满足:0.01g/s等。 Sand Monitor. Main technical specifications: the measurement principle of the monitor shall be acoustic principle, the measurement mode of the monitor shall be non-invasive continuous measurement, the sand detection limit of the monitor meets: oil: 25 μm, gas: 15 μm; the minimum sand production rate/resolution of the monitor meets: 0.01 g/s, etc.
项目所在地
天津市
资金来源
企业自筹
资金落实情况
已落实
是否允许联合体投标
否
异议投诉
huanghw4@cnooc.com.cn
发布媒介
中国海洋石油集团有限公司采办业务管理与交易系统,中国招投标公共服务平台,中国海洋石油集团有限公司供应链数字化平台
标段信息
1. 海油工程-二级品类协议-3年-含砂分析仪品类协议(二次) 标段
标段(包)编号
25-CNCCC-HW-GK-8269/01
发标日期
2025年11月28日
主要技术规格
【★资格条件】二、业绩要求:(开标时需进行信息公开)1、2020年1月1日至投标截止日(以合同签署时间为准),投标人应具有至少1个合同的含砂分析仪或含砂监测仪或出砂检测仪的供货业绩,且满足测量原理为声波式的技术要求。2、投标人须按规定格式提交业绩表,并提交相关业绩证明文件。业绩证明文件至少包含:1)合同复印件和2)到货验收材料。投标人所提交的业绩证明文件必须至少体现以下内容:合同首页、合同签署时间、合同签署页(国内贸易合同应有双方盖章,国际贸易合同应有双方签字或盖章)、货物名称及到货验收材料(至少包含:买方接收证明或调试验收证明或到货验收单或其他可以证明合同项下货物已经到货验收的有效证明材料或″与合同或订单金额一致的所有增值税发票扫描件(如有清单须提供,须体现发票号;发票需包含合同号或物资名称,且与合同或单个订单一致)。”除发票外其他的到货验收材料至少应有合同甲方签字或盖章。)3、若合同为协议,除提供协议文本外,还应至少提供该协议对应的1个已完成订单的订单页和相应的到货验收材料,同一个年协合同下的订单视为1个业绩。4、如业绩合同买方与投标人及所投产品制造商之间具有关联关系(指与投标人及所投产品制造商为同一法人或具有控股关系),则上述合同业绩不接受。5、未提交业绩证明文件,或所提供的业绩证明文件无法认定满足上述业绩要求的,均视为无效业绩。6、其他要求:未按要求在开标阶段进行公开的资质、业绩信息,评标阶段不予认可。评标阶段只评审开标阶段已公开的资质、业绩内容,对在开标环节未公开的资质、业绩内容,即使投标文件中提供了也不认可并不再进行评审。1. From January 1, 2020 to the bid deadline (subject to the time of contract signing), the bidder shall have the supply performance of at least one sand monitor or sand content monitor or sand production detector for the contract, and meet the technical requirements that the measurement principle is acoustic wave type.2. The bidder shall submit the performance table in the specified format and submit relevant performance certificates.The performance certificate shall at least include: 1) copy of the contract and 2) arrival acceptance materials.The performance certificates submitted by the bidder must at least reflect the following contents: the first page of the contract, the time of signing the contract, and the page of signing the contract (domestic trade contracts shall be sealed by both parties.The international trade contract shall be signed or sealed by both parties), the name of the goodsand the arrival acceptance materials (at least including: the buyer's acceptance certificate or the commissioning acceptance certificate or the arrival acceptance form or other valid proof materials that can prove that the goods under the contract have been arrived and accepted, or "scanned copies of all VAT invoices consistent with the contract or order amount" (if there is a list, it must be provided.The invoice number must be reflected; the invoice must contain the contract number or the name of the item and be consistent with the contract or individual order).Except for the invoice, other arrival acceptance materials shall at least be signed or sealed by Party A.3. If the contract is an agreement, in addition to the text of the agreement, at least one order page of the completed order corresponding to the agreement and the corresponding arrival acceptance materials shall also be provided, and the order under the same annual agreement contract shall be regarded as one performance.4. If the buyer of the performance contract is related to the bidder and the manufacturer of the bidding product (referring to the same legal person or holding relationship with the bidder and the manufacturer of the bidding product), the above contract performance is not accepted.5. If the performance certificate is not submitted, or the performance certificate provided cannot be determined to meet the above performance requirements, the performance shall be deemed invalid.6. Other requirements: Qualification and performance information that is not publicly disclosed during the bid opening stage as required will not be recognized during the evaluation stage. During the evaluation phase, only the qualifications and performance content that have been publicly disclosed during the bid opening phase will be evaluated. For qualifications and performance content that have not been publicly disclosed during the bid opening phase, even if provided in the bidding documents, they will not be recognized and will no longer be evaluated.
交货期/服务期/完工期
订货确认单签订后130天内
交货数量
招标范围
含砂分析仪品类购置。主要技术规格:分析仪的测量原理应为声学原理,分析仪测量方式应为非侵入式连续测量,分析仪砂粒检出限满足:油:25 μm,气:15μm;分析仪最小出砂率/分辨率满足:0.01g/s等。 Sand Monitor. Main technical specifications: the measurement principle of the monitor shall be acoustic principle, the measurement mode of the monitor sh
出资比例
生产能力
资格要求
【★资格条件】一、资格要求:1、营业执照:投标人具有合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照,投标时需提供原件扫描件(原件备查)。投标人为事业单位的,应具有合法有效的事业单位法人证书,投标时需提供原件扫描件(原件备查)。投标人为分公司的,提供具有合法有效的营业执照和上级法人单位授权书(授权该分公司投标),认可该分公司和上级法人单位的资质、资格和业绩,不认可同一上级法人单位的其它分公司的资质、资格和业绩,投标时需提供原件扫描件(原件备查)。分公司与上级法人单位只可一家参与投标,同时参与投标的,投标均无效。 如果投标人为中国境外注册公司,需提供有效的公司登记注册证明。2、制造商要求:投标人应为本次投标所投产品的制造商。本次招标不接受代理商或贸易商投标。1)制造商无直销模式,且投标人为制造商同一集团负责销售投标所投产品的全资子公司、控股子公司(投标人应提供制造商或其上级单位证明上述事项的证明文件),则视投标人为制造商。不能再将此货物同时授权给其他投标人参与投标,否则相关的所有投标将被拒绝。2)本次接受制造商的母公司或全资的销售公司、制造商控股的销售公司或者隶属于同一集团的销售公司或全资公司,参与投标的,视为制造商身份投标,投标时需提供相应的证明文件。同一制造商仅允许一家投标人参与投标,否则相关的所有投标将被否决。3)投标人所投产品为国外品牌或国外品牌在国内生产的,如果投标人所提供的货物不是投标人自己制造的,投标人应得到同一集团货物制造商同意其在中国为本次投标提供该货物的合法正式授权,或者母公司的证明或认可。满足上述1)或者2)或者3)要求的投标人视为制造商。投标人(制造商)不能再将此货物同时授权给其他投标人参与投标,否则相关的所有投标将被拒绝。投标时提供符合要求的证明投标人为制造商证明相关材料,材料要求详见格式IV-15制造商证明相关材料。3、关联关系要求:如出现不同投标人的负责人为同一人或存在控股、管理关系的情况,相关投标均无效,招标人随时有权做出拒绝投标、取消投标资格、取消授标、不签订合同或在合同签订后终止合同等决定,相关投标人须无条件接受,且由此做出的任何损失由对应投标人承担。4、体系认证要求:投标人所投产品的制造商投标时需提供合格有效的GB/T19001(ISO9001)质量体系认证证书,并可在中国国家认证认可监督管理委员会网站(http://www.cnca.gov.cn/)核实。如果有国家相关部门发布的最新体系标准,以最新体系标准为准。投标时需提供原件扫描件(原件备查)。注:如所投货物的制造商提供的质量体系认证证书是非中国的第三方认证机构颁发的,则网站查询不适用。Qualification Requirements(Performance track record will be released to all bidders during bid opening):1.Business license:The bidder has a legal and valid business license of enterprise legal person, tax registration certificate and organization code certificate or a business license with one certificate, and shall provide a scanned copy of the original (original for future reference) when bidding.If the bidder is a public institution, it shall have a legal and valid certificate of legal person of the public institution, and shall provide a scanned copy of the original (original for future reference) when bidding.If the bidder is a branch company, it shall provide a legal and valid business license and a letter of authorization from the superior legal entity (authorizing the branch company to bid), recognize the qualifications, qualifications and performance of the branch company and the superior legal entity, and not recognize the qualifications, qualifications and performance of other branches of the same superior legal entity. The original scanned copy (original for future reference) shall be provided when bidding.Only one of the branch and the superior legal entity can participate in the bidding, and the bidding will be invalid if they participate in the bidding at the same time.If the bidder is a company registered outside China, it shall provide a valid certificate of company registration.2.Manufacturer's requirements:The Bidder shall be the manufacturer of the products to be tendered in this bid.This tender does not accept bids from agents or traders.1) If the manufacturer has no direct selling mode, and the bidder is a wholly-owned subsidiary or holding subsidiary of the same group of the manufacturer responsible for selling the bidding products (the bidder shall provide the certification documents of the manufacturer or its superior unit to prove the above matters), the bidder shall be regarded as the manufacturer.The goods can not be authorized to other bidders to participate in the bidding at the same time, otherwise all related bids will be rejected.2) If the parent company or wholly-owned sales company of the manufacturer, the sales company controlled by the manufacturer or the sales company or wholly-owned company of the same group are accepted to participate in the bidding, it shall be regarded as the manufacturer's identity bidding, and the corresponding supporting documents shall be provided when bidding.Only one bidder from the same manufacturer is allowed to participate in the bidding, otherwise all re.3. Requirements for association:If the principals of different bidders are the same person or there is a holding or management relationship, the relevant bids shall be invalid, and the tenderee shall have the right to make decisions at any time, such as refusing to bid, canceling the bidding qualification, canceling the award of contract, not signing the contract or terminating the contract after signing the contract, and the relevant bidders shall unconditionally accept them, and any losses arising therefrom shall be borne by the corresponding bidders.4. System certification requirements:The manufacturer of the products submitted by the bidder shall provide the qualified and valid GB/T19001 (ISO9001) quality system certification , which can be verified on the website of Certification and Accreditation Administration of the People's Republic of China (http://www.cnca.gov.cn/).If there is the latest system standard issued by the relevant national departments, the latest system standard shall prevail.A scanned copy of the original shall be provided at the time of bidding (original for future reference).Note: If the quality system certificate provided by the manufacturer of the goods is issued by a non-Chinese third-party certification body, the website inquiry is not applicable.
招标文件领取时间
2025年11月28日 至 2025年12月04日
招标文件领取方法
请登录中国海洋石油集团有限公司供应链数字化平台(https://bid.cnooc.com.cn/home/#/navigation)的招标公告页面进行购买。首次登录必须先进行注册(免费),注册成功后,方可购买招标文件。购买过程必须全程在线操作,线下形式的汇款将不予接受。标书费支付成功后,投标人可自行下载招标文件。售后不退。如未在系统中领购招标文件,不可参加投标。
招标文件价格
200.00元
投标文件递交截止时间
2025年12月10日 09时30分
投标地点
所有的投标文件必须在投标文件截止时间前在线提交
投标文件递交方法
所有的投标文件必须在投标文件递交截止时间前在线提交
开标时间
2025年12月10日 09时30分
开标地点
中国海油供应链数字化平台
特殊说明
因字符限制【★资格条件】分选描述,请投标人注意阅知。
联系方式
| 招标人:海洋石油工程股份有限公司 |
| 地 址:天津港保税区海滨十五路199号国际贸易与航运服务区3号楼A座A1001室 |
| 联 系 人:王路岩 |
| 电子邮箱:wangly54@cooec.com.cn |
| 邮 编:300461 |
| 联系电话:17561741027 |
| 异议受理人:黄洪伟 |
| 异议受理人联系电话:02266505529 |
| 投诉受理人邮箱(投诉受理专用):gaoling@cnooc.com.cn |
| 投诉受理人:王路岩 |
| 招标代理机构:中化建国际招标有限责任公司天津分公司 |
| 地 址: |
| 联 系 人:黄洪伟 |
| 电子邮箱:huanghw4@cnooc.com.cn |
| 邮 编: |
| 联系电话:02266505529 |